[Enigmalight Update-Thread] v0.2rc1 22-01-2015 (IPK and DEB)

Wir haben aktuell ein Problem mit dem Board und arbeiten an der Lösung...
  • Wuerde mich dranhaengen.
    Kann mir bitte auch jemand die .deb Installation fuer OE2.2 DM7080HD schicken ?
    Wollte mein atmolight und karatelight8 testen.
    Danke
    Charly2mal2

    DM8000 mit RGB-Display Skin=infinityHD/image=exp2011-09-06/GP3,DM7020HD, OE2.0 mit karatelight, DM7080HD

  • moin moin,


    habe gerade den wechsel von Bob zu enigmalight für meine Karatelights gemacht und bin sogar erfolgreich gewesen .. *hehe*


    nun würde ich noch gerne meine 2 Mi-Light Birnen ansteuern die links und rechts neben dem TV hängen. Hat da jemand schonb erfahrung mit gemacht?


    In boblight musste man eine python-datei erstellen an die dann boblight die daten geschickt hat. Speedy schrieb das Mi-Light ist nun direkt eingebunden .. brauche ich da noch irgendwas extra ??



    Würde mich über jede hilfe freuen .. danke



    meine derzeitige config :


  • Hi,
    wunder mich, dass Dein karate läuft!


    setze mal vor "interface und port" eine #


    rate ist eigentlich für's karate 57600


    die prefix zeile komplett löschen (ist nur für adalight und in teilen für's sedulight).
    delay after open ebenfalls.


    An den Philips hue leuchten ist speedy dran, an Deinen weiß ich leider nicht!

  • Hi @all !


    Habe gestern von einer 8000er auf eine 7020HD gewechselt, habe auch das Enigmalight zum laufen gebracht nachdem ich die config angepasst hatte (top left right etc.)


    Nun habe ich das Problem wenn ich das Licht ausschalte bzw. die Box in den Standby schalte der Rote ring manchmal anläuft in unregelmäßigen abständen.


    Kennt jemand eine Lösung für dieses Problem?


    Habe ein Sedulight mit 78 LEDS auf der Box läuft das aktuelle Merlin.


    Hier mal die conf


    #[global]
    interface 127.0.0.1
    port 19333


    [device]
    name ambilight
    output /dev/ttyUSB0
    channels 234
    type momo
    interval 10000
    prefix 5A A1
    postfix A5
    rate 500000


    [color]
    name red
    rgb FF0000
    gamma 0.91
    adjust 1.0
    blacklevel 0.0


    [color]
    name green
    rgb 00FF00
    gamma 0.86
    adjust 0.96
    blacklevel 0.0


    [color]
    name blue
    rgb 0000FF
    gamma 0.95
    adjust 0.8
    blacklevel 0.0


    [light]
    position bottom
    name 001
    color red ambilight 1
    color green ambilight 2
    color blue ambilight 3
    hscan 0 10
    vscan 80 93


    [light]
    position bottom
    name 002
    color red ambilight 4
    color green ambilight 5
    color blue ambilight 6
    hscan 0 10
    vscan 80 86


    [light]
    position bottom
    name 003
    color red ambilight 7
    color green ambilight 8
    color blue ambilight 9
    hscan 0 10
    vscan 73 80


    [light]
    position bottom
    name 004
    color red ambilight 10
    color green ambilight 11
    color blue ambilight 12
    hscan 0 10
    vscan 66 73


    [light]
    position bottom
    name 005
    color red ambilight 13
    color green ambilight 14
    color blue ambilight 15
    hscan 0 10
    vscan 60 66


    [light]
    position bottom
    name 006
    color red ambilight 16
    color green ambilight 17
    color blue ambilight 18
    hscan 0 10
    vscan 53 60


    [light]
    position bottom
    name 007
    color red ambilight 19
    color green ambilight 20
    color blue ambilight 21
    hscan 0 10
    vscan 46 53


    [light]
    position bottom
    name 008
    color red ambilight 22
    color green ambilight 23
    color blue ambilight 24
    hscan 0 10
    vscan 40 46


    [light]
    position bottom
    name 009
    color red ambilight 25
    color green ambilight 26
    color blue ambilight 27
    hscan 0 10
    vscan 33 40


    [light]
    position bottom
    name 010
    color red ambilight 28
    color green ambilight 29
    color blue ambilight 30
    hscan 0 10
    vscan 26 33


    [light]
    position bottom
    name 011
    color red ambilight 31
    color green ambilight 32
    color blue ambilight 33
    hscan 0 10
    vscan 20 26


    [light]
    position bottom
    name 012
    color red ambilight 34
    color green ambilight 35
    color blue ambilight 36
    hscan 0 10
    vscan 13 20


    [light]
    position bottom
    name 013
    color red ambilight 37
    color green ambilight 38
    color blue ambilight 39
    hscan 0 10
    vscan 6 20


    [light]
    position bottom
    name 014
    color red ambilight 40
    color green ambilight 41
    color blue ambilight 42
    hscan 0 10
    vscan 0 20


    [light]
    position bottom
    name 015
    color red ambilight 43
    color green ambilight 44
    color blue ambilight 45
    hscan 4 10
    vscan 0 20


    [light]
    position bottom
    name 016
    color red ambilight 46
    color green ambilight 47
    color blue ambilight 48
    hscan 8 12
    vscan 0 20


    [light]
    position bottom
    name 017
    color red ambilight 49
    color green ambilight 50
    color blue ambilight 51
    hscan 12 16
    vscan 0 20


    [light]
    position bottom
    name 018
    color red ambilight 52
    color green ambilight 53
    color blue ambilight 54
    hscan 16 20
    vscan 0 20


    [light]
    position bottom
    name 019
    color red ambilight 55
    color green ambilight 56
    color blue ambilight 57
    hscan 20 25
    vscan 0 20


    [light]
    position bottom
    name 020
    color red ambilight 58
    color green ambilight 59
    color blue ambilight 60
    hscan 25 29
    vscan 0 20


    [light]
    position bottom
    name 021
    color red ambilight 61
    color green ambilight 62
    color blue ambilight 63
    hscan 29 33
    vscan 0 20


    [light]
    position bottom
    name 022
    color red ambilight 64
    color green ambilight 65
    color blue ambilight 66
    hscan 33 37
    vscan 0 20


    [light]
    position bottom
    name 023
    color red ambilight 67
    color green ambilight 68
    color blue ambilight 69
    hscan 37 41
    vscan 0 20


    [light]
    position bottom
    name 024
    color red ambilight 70
    color green ambilight 71
    color blue ambilight 72
    hscan 41 45
    vscan 0 20


    [light]
    position left
    name 025
    color red ambilight 73
    color green ambilight 74
    color blue ambilight 75
    hscan 45 50
    vscan 0 20


    [light]
    position left
    name 026
    color red ambilight 76
    color green ambilight 77
    color blue ambilight 78
    hscan 50 54
    vscan 0 20


    etc. etc.




  • Vielen Dank für die korrekten Werte .. lief aber trotzdem schon vorher und auch mit genau den selben werten unter boblight *g*


    ich habe in einem Post von Speedy gelesen das er das mi-Light eingebunden hat (im Mi-light thread) - ich werd einfach mal warten bis er aus dem urlaub auftaucht :)



    thx nochmal und guten rutsch :)

  • Hallo zusammen,


    zunächst vielen Dank an alle Aktive hier im Thread. Dank eurer Hilfe und lesens der Beiträge habe ich Enigmalight auf meiner 7080 (mit Merlin4) nun zum laufen gebracht.


    Mir ist durch Zufall (verklicken) jedoch aufgefallen, dass bei mir ein Greenscreen produziert wird, wenn ich im ConfigEditor bei "Device Output" auf OK drücke.
    Für den Betrieb bei mir sicherlich irrelevant, aber irgendetwas hakt dort ja...


    Hab den Crashlog mal angehängt.


    Gruß
    Belp

  • holymoly many thanks for the new version of the plugin.Now after fully loaded receiver now everything is OK

  • Hallo,


    Mit welcher App oder Seite erstellt man am einfachsten eine config für enigmalight?


    Das mit dem Update kann man Händisch machen...


    Ich weis nicht mehr wie ich es an meinem TV gemacht habe und habe es gestern an einem tv von Kollegen gemacht... Nur leider ohne config halt.


    Mit freundlichen Grüßen

    1. Gigablue Quad Plus


    2. Vu+ Duo


    3. DM 7000s


    4. DM 500s


    Geht nicht,Gibts nicht :)

  • Danke hab es installiert... Habe auch ein config erstellt, aber es klappt leider nicht.


    Testprogramm läuft komplett durch beim boot. (Verkabelung passt also )


    Hardware:


    WS2801


    Unten 38 LEDs


    Oben 38 LEDs


    Links/Rechts 20 LEDs


    Arduino Uno



    Welchen USBPort muss ich den anschließen? Unten oder oben?


    Habe es so zZ ( config erstellt mit dem Tool )



    #[global]
    interface 127.0.0.1
    port 19333


    [device]
    threadpriority 99
    name ambilight
    output /dev/ttyACM0 ( USB0 auch ausprobiert und ging auch nicht )
    type momo
    interval 20000
    channels 349
    rate 115200
    debug off
    prefix 5A A2
    postfix A5



    Einer noch eine Idee?


    Mit freundlichen Grüßen

    1. Gigablue Quad Plus


    2. Vu+ Duo


    3. DM 7000s


    4. DM 500s


    Geht nicht,Gibts nicht :)

  • Doch hat geklappt...


    Ich denk das es am Prefix lag...


    mfg

    1. Gigablue Quad Plus


    2. Vu+ Duo


    3. DM 7000s


    4. DM 500s


    Geht nicht,Gibts nicht :)

  • Hi,
    hier mal ein umgebautes RedDot-Testvideo um die Zuweisung der Sektoren zu den einzelnen LEDs checken zu können.


    Das Video ist hauptsächlich für Digital-Systeme wie Sedu- oder Adalight interessant.
    Zum Testen bitte den Speed auf 100 stellen.
    Wichtig! "Overscan" beim TV-Gerät muss "aus" sein.


    spezial THX geht an den "Cinematograph" aus dem "videoaktiv.de" Forum für's Erstellen!

  • Hi EnigmaLight Users!!!


    Sorry for the long time not answering your mails,posts and pm.
    I have it very busy with the family and a another software project for a new customer.


    I will bring end this week a new version (deb and ipk).


    I hope you understand !!


    P.S Thanks for your donations, i can use it for my new coming dm7080 :hurra:


    Kind regards speedy1985

  • Hi,


    ich habe nun auch die beta version "enigma2-plugin-extensions-enigmalight_0.1r6-b1-alpha3_all.rar" darüberinstalliert.
    Mit dieser version funktioniert bei mir auch der "Autostart" und das erstellen der Config. :)


    Nun wollte ich meine config mit dem Test-Video prüfen.
    Leider zeigt das:
    LEDs links: ok
    LEDs top: am Anfang (ca. 25%) stimmt es noch, und dann eilen die LEDs immer mehr dem Video voraus, bis die LEDs aus sind.
    LED rechts: Video ist sichtbar, LEDs bleiben aus, weil ausserhalb.
    LEDs bottom: invers zu "top", die letzten 25% stimmt es wieder.


    Auch beim normalen TV sehen habe ich en eindruck das irgend etwas nicht stimmt.


    Woran kann das liegen?
    A/V Einstellungen (HDMI) an ET9x00: 1080i /multi; 4:3=Pan&Scan; >16:9=nur skalieren


    Meine aktuelle config:


  • Hi, Deine config ist erstmal OK!
    Das Video läuft auch soweit bei Allen. Einzig hatte ein User das Problem, dass der Balken in
    den Ecken verschwand. Das lag aber am eingeschaltetem "Overscan" beim TV-Gerät. Die LEDs müssen aber trotzdem angehen!


    Du kannst ja mal den Reddot drüber laufen lassen und die Testbilder im Plugin.
    [Enigmalight BETA Test-Thread] Beta 0.1r5-b12 23-11-2014
    Falls da einige LEDs nicht reagieren, passt vielleicht der Prefix in der config nicht! Dann versuch mal den "Prefix 5A B0".


    Meine Einstellungen:
    A/V Einstellungen (HDMI) an ET8000: 1080i /multi; 4:3=Pillarbox; >16:9=Letterbox